862D 2 in 1 Electric Digtal Rework Soldering Station Hot Air Gun
Long power cord, easy to operate.
Total 8 stalls for adjust wind speed freely.
Environmental iron tip, lead-free tin plate.
Hot air and hot iron 2in1 rework soldering station.
Very low noise, strong wind and space saving design.
Dual LED digital displays to show precision temperature.
Humanized design, wind temperature can be adjusted from 150°C to 480°C.
Widely used in heating shrink, paint drying, adhesive removal, thawing,warming,plastic welding.
Temperature Stability: ±1℃
Display Type: Digital Display
Plug: China National Standard Plug
(We will be based on your country to send the corresponding adapter plug)
Hot air soldering station:
Specified voltage: 220v/AC
Type of pump: Menbranous
Air flow: 0.3~2.4L/min, Adjustable
Pump power: 15w
Heater: 250W metel
Hot air temperature: 100~240℃
Output voltage: 24v/AC
Temperature range: 200-480℃
Size: (L) x (W) x (H) 245 x 187 x 135mm /9.65' x 7.36'' x 5.31"(appr.)
Installation and use of soldering iron tip:
A. Soldering tip stand
△Caution: sponge can be depressed. Before cleaning, let it absorb water and then try to depress it. Otherwise it will damage the soldering tip
△Cautions: Before connection and dismantle the soldering station. Be sure to switch the power off so that the print circuit will not be damaged
1.Connect the power line to the outlet
2.Place the soldering tip on the stand
3.Plug the outlet for power. Don't forget ground connection
C.Setting of temperature
When the temperature rises to the set, the indicator of the heater will flash, indicating you can start soldering
△Caution: when you are not using the soldering tip, it should be put on the stand
1 x Soldering tip
3 x Air nozzles
1 x Soldering tip stand (sponge for cleaning is included)
1 x Holder for handle of hot air soldering head
1 x Chinese and English manual