1)Human-friendly design,easy to install and maintain.
2)Low start up speed, 3 blades for perfect wind speed areas, high wind energy utilization.
3)The use of heat-resistant teflon copper wire, it is not easy to burn the wire when the generator overload heat.
4)Thicker double groove ball bearings are conducive to the rapid operation of the machine without jitter.
5)Using patented permanent magnet generator and special stator, it effectively reduces torque resistance and guarantees the stability.
6)Blades using reinforced glass fiber, helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity.
Material: Aluminum alloy body + nylon fiber blades
Wheel diameter: 1.9m
|Start-up wind speed||2.5m/s|
|Rated wind speed||10m/s|
|Working wind speed||2.5-25m/s|
|Survival wind speed||50m/s|
|Number of blades||3|
|Blades material||Nylon fiber|
|Generator||Three phase permanent magnet ac synchronous generator|
|Generator case||Casting aluminum alloy|
|Control system||Electromagnet/wind wheel yaw|
|Speed regulation||Automatically adjust windward direction|
|Working temperature||-40℃ to 80℃|
1.The blade installed in the double holes, stainless stell bolts insert the holes.
2.Use L wrench screw up the every stainless stell bolt. (6pcs or 10pcs).
3.Mount the four flat gaskets on the four bolts, then insert the bols int the holes corresponding to the flange.
4.The three wires connected the transmission cable, each length of the spliced wire not less than 30mm, fastened the connectors with tape, the length is about 100mm.
5.The flange seat installed in the tower, put flat gasket and elastic gasket, tighten to nylon nut.
6.The nut into the hexagonal hole, in the middle of the hub, placed on the spindle together, with the right hand fixed the wind whell, left hand counter-clockwise rotaing bolt, lock nut.
7.Diversion cover is corresponding to each blades, fasten tight the diversion cover.
8.Before the three wires connection to the controller, please connect the battery to the controller.
1 x Wind Generator
1 x Windmill Charge Controller