Feiyu Tech G6 360 Degree 3 Axis Camera Gimbal With WiFi Blue Tooth Remote Control For GoPro 6/5 RXO
|Cameras Supported||G6 works with GoPro Hero 6/Hero 5 / HERO4 / HERO3+ / HERO3 / Yi 4K / AEE and other action cameras that have similar dimensions. It also could be compatible with Sony RX0 with the customized adapter.The maximum payload should be no more than 130 gram.|
26650*1, 5000mAh, 3.7V. Charging via USB port is supported.
|Usage Time In Theory||
Without charging the cameras:12 hours
Charging the cameras when using:5 hours
It take 12 hours to fully charge G6 with 5V/1A power adapter
It take 7 hours to fully charge G6 with 5V/2A power adapter
The Multi-used charger made by FeiyuTech is not compatible with the 26650 batteries.
|Splash–proof Grade||Only splash-proof. It is banned from using under water, and being exposed to salt water.|
Roll: 320°(keep horizontal)
For GoPro cameras, it is fine to place tilt motor on either left or right side. The suggestion is to have the heavier side of camera next to tilt motor for better stability.
For Sony RX0, tilt motor should be placed on the right side( from the perspective of photographer ).
|How to balance||With the movement of cross arm to make gimbal balanced|
|Power on/off||POWER ON/ OFF: Long press the function button, the display will show “FY” and release it when you hear the beep tone.|
|Working Modes||Two-letter abbreviations for working modes: Panning mode–HF; Follow mode–AF; Lock mode–LK.|
Connect to cameras
1. Turn on WiFi of action camera
2. Connect with Feiyu ON App, click the icon “Get WIFI” at the top of virtual joystick
3. Select camera model (GoPro or RX0), and find the camera in the WIFI list
4. Input WIFI password, and wait for the connection to be done. When it is done, the right icon is showed up in the display
5. Tap setting button to change settings of camera and use shutter button to control camera to take photo/video
1. Turn on WiFi of action camera
2. Connect with Feiyu ON App, select "Settings" — "Parameters Settings" –"WiFi Settings"
3. Select camera model
4. Select connection name of the camera and enter the correct connection password
5. Waiting for connecting
6. Connect successfully
Camera setting (only for GoPro 5/6 and Sony RX0)
1. Connect gimbal with camera’s WIFI (Please refer to the chapter "Connecting to camera" )
2. Long press setting button until the set interface of camera shows up on OLED screen. Joystick could not control gimbal to spin at this point.
Move joystick left or right to switch content, and move joystick up and down to set up parameters. When adjustment of setting is done, move joystick to right to select "OK" for confirmation, then "Setting" displays on the screen. Single tap setting button to go back to main interface. The options of content are: resolution, frame rate and view width.
Move joystick up or down to switch content, and long press setting button to find sub-options. When adjustment of setting is done by moving joystick up and down, move joystick to the right for confirmation, then "Setting" displays on the screen, and the new parameters are saved. Single tap setting button to close set interface of camera and go back to main interface. The options of content are: white balance and ISO.
|Weight||336g (not inclusive of battery, camera and so forth)|
|Standard Accessories||26650 Rechargeable Battery*1, USB Cable*1, Type C charging cable*1|
|Optional Accessories||Extension pole, FY Universal Tripod|
|Extended Interface||Two 1/4 inch screw holes (on the side of handle and on the bottom)|
Main functions for users
Initialize the gimbal when it is not level.
Upgrade the firmware by your PC or Mac (USB connector is needed).
Charging camera by the cable provided(Type-C port).
Manually set up the start, the finish and the rotation route in auto-rotation mode.
Manually lock the pan and tilt axes in any angles .
Connecting Feiyu ON App for firmware upgrade, setting parameters and virtual remote control.
Change the modes of Hero 5/6, set up frame rate, resolution, view width, and control camera to take photo/video.
Change the modes of RX0, set up white balance, ISO, and control camera to take photo/video.
Excellent splashproof technology ,no more resistance between you and the rain.
Unlimited rotation of tilt and pan axes allows to take wider footage.
Users can accurately compose the pictures without external monitor with a 35 degree elevation angle of roll axis in design.
Suitable for many kinds of cameras with no need for replacing other mounting plate.
Anti-drop screws design without fear of missing any parts.
It is pretty straight-forward to get information from OLED screen,such as battery indicator of the gimbal,working mode and the camera mode.
Customers are provided more options with the customized adapter for Sony RX0.
Power on and off with a reminder of the beep can be heard clearly outdoors.
Change different modes of camera by one button.
It becomes utterly straightforward to have camera do photography.
5000 mAH battery provides a full supply of power to gimbal and camera.
Intelligently follow pre-set route in auto-rotation mode, matching motion time-lapse or automatic shooting.
Manually lock the angles of two axis without missing any splendid moments.
Find the unique beauty created by separate roll rotation control.
Trigger button to quickly enter lock mode and reset the gimbal.
Intelligent initialization to automatically check motionless desk and auto-complete.
Quick upgrade, set parameters, reset and virtual remote control with APP.
Three main working modes fit for most scene.
Compatible with extension pole and tripod with 1/4 inch thread hole on the side of handle and on the bottom.
Usual Manal and APP Download:
Start Scanning QR code to download the App
Recommend using scanning
plug-in of Chrome to
download the App.
1 x Gimbal