Grinding Head Positioner Sanding Guide Attachment Locator Rotary Tool Drill Adapter
Application: Fits for Dremel Models: 4000, 400, 398, 395, 3000, 285, 275, 200, 100, 8200, 800, 780.
Made of engineering plastics, high temperature resistance.
Enhanced control during sanding and grinding applications.
Platform offers stability during edge sanding and sharpening.
Adjustable depth control for a precise finish.
The guide has a 90 and 45 degree bevel for various sanding applications.
Step 1: Remove the housing cap A from the end of the tool and set housing cap aside. The original housing cap must be reinstalled when
this attachment is not used (Fig. 1).
Step 2 & 3: Loosen the collet nut and place your accessory in and tighten.
Note: The attachment is for ½” diameter accessories or smaller.
When inserting a bit into your Dremel Rotary Tool be sure that the bit is securely inserted into the collet.
Always use the wrench to tighen the collet nut to prevent the bit from loosening within the collet.
Do not use the Dremel Chuck.
Thread the attachment B onto the threaded portion of the housing collar C (Fig. 2).
Step 5: Adjust the attachment B to the desired depth by loosening the wing knob D (Fig. 3).
Please note that Router bits are not allowed to use with the Sanding/GrindingGuide attachment.
1 x Sanding Grinding Guide